Multiscale monitoring of interface failure of brittle coating/ductile substrate systems: a non-destructive evaluation method combined digital image correlation with acoustic emission
MetadataShow full item record
In this paper, we proposed a non-destructive evaluation method combined digital image correlation with acoustic emission techniques. The method was used to in situ monitor interface failure and internal damage of brittle coating/ductile substrate systems with different size scales. The results show that there is a good relationship between digital image correlation and acoustic emission signals, which can be applied to judge cracking formation and coating delamination and to determine fracture toughness of a thermal barrier coating system subjected to bending.
Copyright 2011 American Institute of Physics. This article may be downloaded for personal use only. Any other use requires prior permission of the author and the American Institute of Physics. The following article appeared in Journal of Applied Physics and may be found at http://dx.doi.org/10.1063/1.3651378
Showing items related by title, author, creator and subject.
Kwok, Swee Har Teresa (2004)Hydroxypropylmethylcellulose (HPMC), which is available in different degrees of substitution and viscosity designations, is one of the most commonly used cellulosic polymers in aqueous film coating. It is relatively easy ...
Deposition of Coating to Protect Waste Water Reservoir in Acidic Solution by Arc Thermal Spray ProcessLee, H.; Park, J.; Singh, J.; Ismail, Mohamed (2018)© 2018. The corrosion characteristics of 304 stainless steel (SS) and titanium (Ti) coatings deposited by the arc thermal spray process in pH 4 solution were assessed. The Ti-sprayed coating exhibits uniform, less porous, ...
Influence of Zn and Mg Alloying on the Corrosion Resistance Properties of Al Coating Applied by Arc Thermal Spray Process in Simulated Weather SolutionLee, H.; Kwon, S.; Singh, J.; Ismail, Mohamed (2018)© 2018, The Chinese Society for Metals and Springer-Verlag GmbH Germany, part of Springer Nature. In this study, Al–Zn and Al–Mg coatings were deposited on steel substrates by an arc thermal spray process. X-ray diffraction ...