Show simple item record

dc.contributor.authorDuan, J.
dc.contributor.authorQuadir, Md Zakaria
dc.contributor.authorXu, W.
dc.contributor.authorKong, C.
dc.contributor.authorFerry, M.
dc.date.accessioned2017-01-30T13:25:32Z
dc.date.available2017-01-30T13:25:32Z
dc.date.created2016-10-26T19:30:22Z
dc.date.issued2016
dc.identifier.citationDuan, J. and Quadir, M.Z. and Xu, W. and Kong, C. and Ferry, M. 2016. Texture balancing in a fcc/bcc multilayered composite produced by accumulative roll bonding. Acta Materialia. 123: pp. 11-23.
dc.identifier.urihttp://hdl.handle.net/20.500.11937/31453
dc.identifier.doi10.1016/j.actamat.2016.10.023
dc.description.abstract

The high strain deformation and recrystallization behaviour of a Fe/Ni multilayered composite sheet fabricated by accumulative roll bonding has been investigated. The comparable initial hardness and subsequent strain hardening behaviour of the Ni and Fe layers reduces the flow compatibility related challenges at the bonding interfaces, thereby generating parallel layers of uniform thickness during rolling to true strains up to 4.18. Typical body centred cubic (α- and γ-fibres) and face centred cubic (β-fibre) rolling textures were generated in the Fe and Ni layers, respectively. During annealing at 700 °C, recrystallization takes place homogenously in the Ni layers but commences initially by particle stimulated nucleation at oxide debris present at the interface of adjacent Fe layers. After recrystallization, the texture of the Ni layers is similar to the starting material prior to ARB, but considerable texture modification occurs in the Fe layers. For both metals, oriented growth of nucleated grains has the greatest influence on the final annealing textures, which generates the classic Cube texture in Ni and a {511}<1 5 10> texture in Fe. While these final textures of the individual Fe and Ni layers are not conducive to good formability, texture-based Schmidt factor calculations of the combined layers show an overall balance in texture components that points to a reduction in planar anisotropy. The ability to fabricate multilayered textured sheets by this route is a promising way of controlling the anisotropy of both strength and ductility.

dc.publisherPergamon Press
dc.titleTexture balancing in a fcc/bcc multilayered composite produced by accumulative roll bonding
dc.typeJournal Article
dcterms.source.volume123
dcterms.source.startPage11
dcterms.source.endPage23
dcterms.source.issn0956-7151
dcterms.source.titleActa Materialia
curtin.departmentJohn de Laeter CoE in Mass Spectrometry
curtin.accessStatusFulltext not available


Files in this item

FilesSizeFormatView

There are no files associated with this item.

This item appears in the following Collection(s)

Show simple item record