Ethernet Control AC Motor via PLC using LabVIEW
MetadataShow full item record
Remotely control applications over a wide area had been commonly used in the industries today. One of the common applications requires remote control and monitoring is inverter fed induction drive system. Drive system has various types of controller, in order to perform some actions such as control the speed, forward and reverse turning direction of the motor. This approach can be done by Programmable Logic Controller (PLC), and with the rise of the technology, Ethernet module will be used in order to achieve the remote con-trol system. Plus the PLC today can be controlled not only using its original software, but 3rd party software as well, such as LabVIEW. LabVIEW is a human machine interfaces design software that is user friendly. It can be easily communicate with different hardware.
Showing items related by title, author, creator and subject.
Karnanto, Kukuh; Islam, Syed; Ortega-Sanchez, Cesar (2006)In a power network where more than one generator is used to supply a load, power generators have to be controlled with the lowest power production cost. Network load in a power system is always varying with occasional ...
Eren, Halit; Al-Ghamdi, A.; Luo, J. (2009)Gases emitted from automobile exhausts have been monitored using a gas sensor arrays. The information from the sensor array has been transmitted to a remote location by ZigBee wireless technology. Quantitative and qualitative ...
Li, Z.; Du, Y.; Abu-Siada, Ahmed; Bao, G.; Yu, J.; Hu, T.; Zhang, T. (2018)OAPA This paper proposes an improved online calibration technique for digital input electricity meters. The technique employs a double spectral line interpolation fast Fourier transform algorithm with four-item, three-order ...