Developing the Guidelines for Fabrication of Laboratory Prototype Voltage Source Converters
dc.contributor.author | Chandrasena, Ruwan Pathiranage Sarath | |
dc.contributor.author | Barbieri, F. | |
dc.contributor.author | Shahnia, Farhad | |
dc.contributor.author | Ghosh, Arindam | |
dc.contributor.author | Rajakaruna, Sumedha | |
dc.contributor.editor | Dr. Ahmed Abu-Siada | |
dc.date.accessioned | 2017-01-30T13:37:31Z | |
dc.date.available | 2017-01-30T13:37:31Z | |
dc.date.created | 2014-09-30T20:00:22Z | |
dc.date.issued | 2014 | |
dc.identifier.citation | Chandrasena, R. and Barbieri, F. and Shahnia, F. and Ghosh, A. and Rajakaruna, S. 2014. Developing the Guidelines for Fabrication of Laboratory Prototype Voltage Source Converters, in Dr. Ahmed Abu-Siada (ed), 24th Australasian Universities Power Engineering Conference (AUPEC 2014), Sep 28-Oct 1 2014, pp. 1-8. Perth, WA: Institute of Electrical and Electronics Engineers (IEEE). | |
dc.identifier.uri | http://hdl.handle.net/20.500.11937/33510 | |
dc.identifier.doi | 10.1109/AUPEC.2014.6966618 | |
dc.description.abstract |
This paper presents the general guidelines on developing a laboratory prototype Voltage Source Converter (VSC). One of the main possible reasons behind the limited hardware verification by postgraduate students, carrying out research in the area of power electronics and especially the VSCs, is the lack of knowledge and unavailability of proper tutorials and guidelines for developing hardware prototypes. In this paper, majorityof the auxiliary circuits and modules which are required for building up a prototype VSC are introduced. Proper examples are provided at each stage to improve the effectiveness of the developed guideline. The main difficulties of the hardware experiments are mentioned and possible solutions and recommendations are presented throughout the paper. It is believed that this paper will highly benefit the postgraduate students at the early stages of their hardware experiments. | |
dc.publisher | Institute of Electrical and Electronics Engineers (IEEE) | |
dc.subject | Printed Circuit Board - Assembly (PCBA) | |
dc.subject | Printed Circuit Board (PCB) | |
dc.subject | Laboratory prototype | |
dc.subject | Voltage Source Converter (VSC) | |
dc.title | Developing the Guidelines for Fabrication of Laboratory Prototype Voltage Source Converters | |
dc.type | Conference Paper | |
dcterms.source.startPage | 1 | |
dcterms.source.endPage | 8 | |
dcterms.source.title | 24th Australasian Universities Power Engineering Conference (AUPEC 2014) | |
dcterms.source.series | 24th Australasian Universities Power Engineering Conference (AUPEC 2014) | |
dcterms.source.isbn | 978-0-646-92375-8 | |
dcterms.source.conference | 24th Australasian Universities Power Engineering Conference (AUPEC 2014) | |
dcterms.source.conference-start-date | Sep 28 2014 | |
dcterms.source.conferencelocation | Perth, Australia | |
dcterms.source.place | USA | |
curtin.note |
Copyright © 2014 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works. | |
curtin.department | Department of Electrical and Computer Engineering | |
curtin.accessStatus | Open access |