An experimental study on machining of SiC reinforced MMCs

Pramanik, Alokesh; Zhang, Liangchi; Arsecularatne, Joseph

Access Status

Fulltext not available

Authors

Pramanik, Alokesh

Zhang, Liangchi

Arsecularatne, Joseph

Date

2006

Type

Conference Paper

Metadata

Show full item record

Citation

Pramanik, A. and Zhang, L. C. and Arsecularatne, J. A. 2006. An experimental study on machining of SiC reinforced MMCs, in Arayama, T. (ed), The 2nd International Student Conference at Ibaraki University (2nd ISCIU), Oct 5-6 2006. Hitachi, Japan: Ibaraki University, Ibaraki, Japan.

Source Title

Proceedings of the 2nd International Student Conference at Ibaraki University (2nd ISCIU)

Source Conference

The 2nd International Student Conference at Ibaraki University (2nd ISCIU)

URI

http://hdl.handle.net/20.500.11937/34079

Collection

Curtin Research Publications

Abstract

This paper presents an experimental study on turning of metal matrix composite (MMC) with poly-crystalline diamond tool (PCD). Experiments were carried out on an MMC work material for varying values of depth of cut, feed and cutting speed and, process parameters such as shear angle, cutting forces, surface roughness and residual stress were measured. These experimental results were then used to study the relations between the above process parameters and machining parameters. A relation between shear and friction angles was also established.