Effect of Machining Velocity in Nanoscale Machining Operations
MetadataShow full item record
The aim of this study is to investigate the generated forces and deformations of single crystal Cu with (100), (110) and (111) crystallographic orientations at nanoscale machining operation. A nanoindenter equipped with nanoscratching attachment was used for machining operations and in-situ observation of a nano scale groove. As a machining parameter, the machining velocity was varied to measure the normal and cutting forces. At a fixed machining velocity, different levels of normal and cutting forces were generated due to different crystallographic orientations of the specimens. Moreover, after machining operation percentage of elastic recovery was measured and it was found that both the elastic and plastic deformations were responsible for producing a nano scale groove within the range of machining velocities from 250-1000 nm/s.
Showing items related by title, author, creator and subject.
The influence of rock mass and intact rock properties on the design of surface mines with particular reference to the excavatability of rockKramadibrata, Suseno (1996)The main aim of this Thesis is to examine how the rock mass and intact rock properties influence the excavatability of rock in surface mine. One of the most important decisions in the design of surface mine is the selection ...
Aldrich, Chris; Marais, C.; Shean, B.; Cilliers, J. (2010)Research and development into the application of machine vision in froth flotation systems has continued since its introduction in the late 1980s. Machine vision is able to accurately and rapidly extract froth characteristics, ...
An investigation into the effects of thermal errors of a machine tool on the dimensional accuracy of partsLu, Yuxia (2012)The reduction of machining errors has become increasingly important in modern manufacturing in order to obtain the required quality of parts. Geometric error makes up the basic part of the inaccuracy of the machine tool ...