Direct Measurement of Blast Pressure in Near Field with Lead Plate Blast Pressure Meter
MetadataShow full item record
Deformation of Lead plate blast pressure meter were measured after they were exposed to surface blasting. Blasting pressure was determined by comparing the data with calibration graph which was drawn from the laboratory experiments with gas gun of Hopkinson bar tester. The results were compared with calculated values from the equations of CONWEP (Conventional Weapons Effects Program) and DDESB (Department of Defence Explosives Safety Board). Measured values were lower than calculated values in near field. Gradual decaying tendency of the pressure was observed. It means that estimated blasting pressure of very near field with theoretical equations can be uncertain.
Showing items related by title, author, creator and subject.
Hao, Yifei; Hao, Hong; Shi, Y.; Wang, Z.; Zong, R. (2017)© 2017 World Scientific Publishing CompanyTo protect structures from external explosions, solid protective barriers have been demonstrated by experimental and numerical studies to be able to effectively mitigate blast ...
Hao, Hong; Li, Z.; Shi, Y. (2016)Some structures, both military and civilian, might experience explosive loads during their service life. Owing to high uncertainties in blast load predictions and structural parameters, accurate assessment of the performances ...
The analysis of ground vibrations induced by foundation excavation test blasts nearby a buried high pressure gas pipelineDağaşan, Yasin; Erten, Oktay; Bilgin, H. (2015)Due to the increase in earthwork rate in engineering applications, rock breakage nearby sensitive structures has become an important operation. Blasting, as one of the rock breakage methods, is a powerful tool and frequently ...