Transfer of vertical geodetic control using only one GPS receiver: a case study.
MetadataShow full item record
Normally, the precise transfer of vertical geodetic control by GPS requires two receivers operating simultaneously in carrier-phase mode. This paper describes the transfer of vertical control into areas that have sparse existing geodetic control using only a single GPS receiver. The GPS data were processed using the Australian Surveying and Land Information Group's (AUSLIG's) AUSPOS on-line GPS processing facility (www.auslig.gov.au/geodesy/sgc/ wwwgps/wwwgps.htm). These GPS-estimated ellipsoidal heights were transformed to the Australian Height Datum (AHD) using AUSGeoid98. In the case study area of Western Australia, a small bias had to be applied to account for the absolute difference between AUSGeoid98 and the AHD before the detailed spirit-levelling traverses, tied to these single-GPS-derived heights, were integrated with a digital elevation model.
Merged with: Cartographer to form: Journal of spatial science.
Showing items related by title, author, creator and subject.
The effects of different cutting heights, mulching and burning on the control of bellyache bush (jatropha gossypifolia L.) applicable in East TimorGuterres, Acacio da Costa (2008)Since bellyache bush invaded to East Timor it has significantly reduced crop and animal production and consequential loss of income from farm enterprises. Methods of control of bellyache bush chosen should be appropriate ...
Featherstone, Will; Kirby, Jonathan (1998)The geoid is the equipotential surface to which orthometric heights are referred, whereas the quasigeoid is the non-equipotential surface to which normal heights are referred. The Australian Height Datum is a hybrid of ...
Featherstone, Will; Stewart, Michael (2001)Ellipsoidal and Australian Height Datum heights have been determined for a 60-point control network from five base-stations by three separate users using three different makes of real-time kinematic (RTK) Global Positioning ...