Show simple item record

dc.contributor.authorZhao, Z.
dc.contributor.authorYao, C.
dc.contributor.authorHashemnia, N.
dc.contributor.authorIslam, Syed
dc.date.accessioned2017-03-17T08:29:44Z
dc.date.available2017-03-17T08:29:44Z
dc.date.created2017-02-19T19:31:37Z
dc.date.issued2016
dc.identifier.citationZhao, Z. and Yao, C. and Hashemnia, N. and Islam, S. 2016. Determination of nanosecond pulse parameters on transfer function measurement for power transformer winding deformation. Transactions on Dielectrics and Electrical Insulation. 23 (6): pp. 3761-3770.
dc.identifier.urihttp://hdl.handle.net/20.500.11937/51127
dc.identifier.doi10.1109/TDEI.2016.005928
dc.description.abstract

Transfer function method is now a widely acceptable tool to diagnose transformer winding deformations. A sweep frequency sine wave generator is often used to excite the different modes of resonance and anti-resonances. However, it is time consuming. Nanosecond square wave pulse signal offers an alternative that can serve the same objective. However, as so far, there is no certain criterion for selecting pulse parameters. This paper provides a comprehensive method for the determination of nanosecond square wave pulse parameters for transfer function evaluation of power transformer for winding deformation studies.

dc.publisherInstitute of Electrical and Electronics Engineers
dc.titleDetermination of nanosecond pulse parameters on transfer function measurement for power transformer winding deformation
dc.typeJournal Article
dcterms.source.volume23
dcterms.source.number6
dcterms.source.startPage3761
dcterms.source.endPage3770
dcterms.source.issn1070-9878
dcterms.source.titleIEEE Transactions on Dielectrics and Electrical Insulation
curtin.departmentDepartment of Electrical and Computer Engineering
curtin.accessStatusFulltext not available


Files in this item

FilesSizeFormatView

There are no files associated with this item.

This item appears in the following Collection(s)

Show simple item record