Show simple item record

dc.contributor.authorCasandra, A.
dc.contributor.authorTsay, R.
dc.contributor.authorPhan, Chi
dc.contributor.authorLin, S.
dc.date.accessioned2017-11-24T05:26:01Z
dc.date.available2017-11-24T05:26:01Z
dc.date.created2017-11-24T04:48:47Z
dc.date.issued2017
dc.identifier.citationCasandra, A. and Tsay, R. and Phan, C. and Lin, S. 2017. An examination of the one-parameter adsorption equation without using the Gibbs adsorption equation. Colloids and Surfaces A: Physicochemical and Engineering Aspects. 512: pp. 137-144.
dc.identifier.urihttp://hdl.handle.net/20.500.11937/58493
dc.identifier.doi10.1016/j.colsurfa.2016.10.030
dc.description.abstract

© 2016 Elsevier B.V. The study of surfactant adsorption kinetics at a gas-liquid interface has essentially been built with the Gibbs adsorption equation. A simple one-parameter adsorption equation without using the Gibbs adsorption equation was proposed and tested on surfactants C 14 TAB and C 16 TAB [Phan et al., Colloids Surfaces A 406 (2012) 24 and Langmuir 29 (2013) 4743] to describe equilibrium surface tension. The applicability of this one-parameter adsorption equation was examined in this study. Theoretical equilibrium surface tension (ST) of nonionic and ionic surfactants generated from the Langmuir and Frumkin isotherms and several sets of experimental ST data were compared with the one-parameter adsorption equation. This study demonstrates that this one-model adsorption equation predicts the equilibrium ST of the aqueous surfactant solutions well following: (i) the nonionic Langmuir isotherm with G 8  ~ 20 × 10 -10  mol/cm 2 or (ii) the nonionic Frumkin isotherm with a specific correlation between maximum surface concentration and intermolecular interaction, K = 0.12 (G 8  × 10 10 ) - 2.6. It is concluded from this study that the one-parameter adsorption equation is not a general predictive model and cannot describe general equilibrium ST data except under the above conditions.

dc.publisherElsevier BV
dc.titleAn examination of the one-parameter adsorption equation without using the Gibbs adsorption equation
dc.typeJournal Article
dcterms.source.volume512
dcterms.source.startPage137
dcterms.source.endPage144
dcterms.source.issn0927-7757
dcterms.source.titleColloids and Surfaces A: Physicochemical and Engineering Aspects
curtin.departmentDepartment of Chemical Engineering
curtin.accessStatusFulltext not available


Files in this item

FilesSizeFormatView

There are no files associated with this item.

This item appears in the following Collection(s)

Show simple item record