Effect of machining parameters on surface finish of Inconel 718 in end milling
|dc.identifier.citation||Sarkar, B. and Reddy, M. and Debnath, S. 2017. Effect of machining parameters on surface finish of Inconel 718 in end milling.|
© The Authors, published by EDP Sciences, 2017. Surface finish is an important criteria in machining process and selection of proper machining parameters is important to obtain good surface finish. In the present work effects of the machining parameters in end milling of Inconel 718 were investigated. Central composite design was used to design the total number of experiments. A Mathematical model for surface roughness has been developed using response surface methodology. In this study, the influence of cutting parameters such as cutting speed, feed rate and depth of cut on surface roughness was analyzed. The study includes individual effect of cutting parameters on surface roughness as well as their interaction. The analysis of variance (ANOVA) was employed to find the validity of the developed model. The results show that depth of cut mostly affected the surface roughness. It is also observed that surface roughness values are comparable in both dry and wet machining conditions.
|dc.title||Effect of machining parameters on surface finish of Inconel 718 in end milling|
|dcterms.source.title||MATEC Web of Conferences|
|dcterms.source.series||MATEC Web of Conferences|
|curtin.accessStatus||Fulltext not available|
Files in this item
There are no files associated with this item.