The effect of cutting parameters on power consumption during turning nickel based alloy
dc.contributor.author | Nur, R. | |
dc.contributor.author | Noordin, M. | |
dc.contributor.author | Izman, S. | |
dc.contributor.author | Kurniawan, Denni | |
dc.date.accessioned | 2018-05-18T07:59:59Z | |
dc.date.available | 2018-05-18T07:59:59Z | |
dc.date.created | 2018-05-18T00:23:20Z | |
dc.date.issued | 2014 | |
dc.identifier.citation | Nur, R. and Noordin, M. and Izman, S. and Kurniawan, D. 2014. The effect of cutting parameters on power consumption during turning nickel based alloy, pp. 799-802. | |
dc.identifier.uri | http://hdl.handle.net/20.500.11937/67851 | |
dc.identifier.doi | 10.4028/www.scientific.net/AMR.845.799 | |
dc.description.abstract |
Machining process should also consider environmental aspect, with power consumption as one of the criteria. Cutting parameters can be optimized to minimize power consumption. This paper takes a study on turning of nickel-based hastelloy under dry condition (no cutting fluid) which varies cutting speed (150, 200, and 250 m/min) and depth of cut (0.5, 1.0, and 1.5 mm). Power consumption of particular machining process at various cutting parameters was derived and calculated. It was found that minimum power consumption was shown when the turning process was performed at the lowest cutting speed and depth of cut. © (2014) Trans Tech Publications, Switzerland. | |
dc.title | The effect of cutting parameters on power consumption during turning nickel based alloy | |
dc.type | Conference Paper | |
dcterms.source.volume | 845 | |
dcterms.source.startPage | 799 | |
dcterms.source.endPage | 802 | |
dcterms.source.title | Advanced Materials Research | |
dcterms.source.series | Advanced Materials Research | |
dcterms.source.isbn | 9783037859360 | |
curtin.department | Curtin Malaysia | |
curtin.accessStatus | Fulltext not available |
Files in this item
Files | Size | Format | View |
---|---|---|---|
There are no files associated with this item. |