Show simple item record

dc.contributor.authorBen Mahmud, Hisham
dc.contributor.authorAbdullah, A.
dc.date.accessioned2018-12-13T09:13:12Z
dc.date.available2018-12-13T09:13:12Z
dc.date.created2018-12-12T02:46:36Z
dc.date.issued2017
dc.identifier.citationBen Mahmud, H. and Abdullah, A. 2017. Investigate a Gas Well Performance Using Nodal Analysis, International Conference on Materials Technology and Energy: IOP Publishing.
dc.identifier.urihttp://hdl.handle.net/20.500.11937/72352
dc.identifier.doi10.1088/1757-899X/217/1/012022
dc.description.abstract

Gas condensate well has unique reservoir characteristics and ups and downs in well behaviour affect the production rate significantly. A proper optimization can reduce the operating cost, maximize the hydrocarbon recovery and increase the net present value. Well level optimization can be achieved through optimizing well parameters, such as wellhead, tubing size, and skin factor. All of these factors have been investigated using a real field of Thrace Basin and PROSPER simulation program. The history matching data are validated to identify the future performance prediction for the same reservoir deliverability following the period changes. Therefore, predicted results are compared and validated with measured field data to provide the best production practices. Moreover, the results show that the skin factor has a large influence on the production rate by 45% reduction. The reduction in the reservoir pressure declines the production rate dramatically resulted in 70% decline. While manipulating the wellhead pressure shows minor decline compare to tubing size that does not show any significant change to production rate.

dc.publisherIOP Publishing
dc.rights.urihttp://creativecommons.org/licenses/by/3.0
dc.titleInvestigate a Gas Well Performance Using Nodal Analysis
dc.typeConference Paper
dcterms.source.volume217
dcterms.source.issn1757-8981
dcterms.source.titleIOP Conference Series: Materials Science and Engineering
dcterms.source.seriesIOP Conference Series: Materials Science and Engineering
dcterms.source.conferenceInternational Conference on Materials Technology and Energy
dcterms.source.place-
curtin.departmentCurtin Malaysia
curtin.accessStatusOpen access


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record

http://creativecommons.org/licenses/by/3.0
Except where otherwise noted, this item's license is described as http://creativecommons.org/licenses/by/3.0