Show simple item record

dc.contributor.authorPienaar, H.
dc.contributor.authorAndriambeloson, J.
dc.contributor.authorDavidson, David
dc.date.accessioned2018-12-13T09:13:58Z
dc.date.available2018-12-13T09:13:58Z
dc.date.created2018-12-12T02:47:12Z
dc.date.issued2017
dc.identifier.citationPienaar, H. and Andriambeloson, J. and Davidson, D. 2017. RF shielding for multi-copter based electromagnetic metrology platforms.
dc.identifier.urihttp://hdl.handle.net/20.500.11937/72632
dc.identifier.doi10.1109/CAMA.2016.7815781
dc.description.abstract

© 2016 IEEE. Radio frequency (RF) metrology using unmanned aerial vehicles (UAV's) is adding a new dimension to Electromagnetic Compatibility (EMC) investigations. However, the self-induced radio frequency interference (RFI) has limited its applications. We investigate the feasibility of an RFI-quiet multicopter, designed from inception with electromagnetic shielding in mind. This work discusses and tests the shielding effectiveness (SE) of the designed vehicle. Shielding levels between 20-30 dB were obtained without adding significant weight to the vehicle. This effort reduced the total radiated RFI power to -70 dBm with possible future improvements further reducing this level to below our measurement noise floor.

dc.titleRF shielding for multi-copter based electromagnetic metrology platforms
dc.typeConference Paper
dcterms.source.title2016 IEEE Conference on Antenna Measurements and Applications, CAMA 2016
dcterms.source.series2016 IEEE Conference on Antenna Measurements and Applications, CAMA 2016
dcterms.source.isbn9781467389327
curtin.departmentCurtin Institute of Radio Astronomy (Engineering)
curtin.accessStatusFulltext not available


Files in this item

FilesSizeFormatView

There are no files associated with this item.

This item appears in the following Collection(s)

Show simple item record