Show simple item record

dc.contributor.authorAltowairqi, Y.
dc.contributor.authorRezaee, M. Reza
dc.contributor.authorEvans, Brian
dc.contributor.authorUrosevic, Milovan
dc.date.accessioned2018-12-13T09:14:07Z
dc.date.available2018-12-13T09:14:07Z
dc.date.created2018-12-12T02:46:50Z
dc.date.issued2016
dc.identifier.citationAltowairqi, Y. and Rezaee, M.R. and Evans, B. and Urosevic, M. 2016. Shale elastic property relationships as a function of TOC content using synthetic samples.
dc.identifier.urihttp://hdl.handle.net/20.500.11937/72656
dc.identifier.doi10.15530/urtec-2016-2435354
dc.description.abstract

Copyright 2016, Unconventional Resources Technology Conference (URTeC). Understanding the main factors that control elastic properties of organic shale is crucial for exploration and successful gas production from unconventional reservoirs. Mechanical and dynamic elastic properties are important shale characteristics that are not yet well understood as there have been a limited number of investigations involving organic rich shale samples. Synthetic shale core samples whose clay mineralogy, non-clay mineral content and Total Organic Carbon (TOC) content are known can be used to study variations of elastic parameters in a controlled experimental environment including in-situ stress conditions. A total of 17 synthetic shale samples with different mineral composition and TOC percentage were created for our investigations under isotropic stressed and unstressed conditions. Ultrasonic transducers were used to measure body wave velocities, which were then used to calculate the elastic properties of different shale samples. The results demonstrate that P- and S-wave velocities vary under isotropic stress conditions with respect to the TOC and clay mineral content. It is shown that isotropic stress significantly impacts velocity and the velocities of P- and S-waves are inversely proportional to TOC content. In addition, the increase in the TOC content reduced density and increased shale porosity. This study presents equations that allow us to estimate shale TOC content using compressional and shear wave velocities and density. This paper has been published in Journal of Petroleum Science and Engineering (Altowairqi et al., 2015).

dc.titleShale elastic property relationships as a function of TOC content using synthetic samples
dc.typeConference Paper
dcterms.source.titleSPE/AAPG/SEG Unconventional Resources Technology Conference 2016
dcterms.source.seriesSPE/AAPG/SEG Unconventional Resources Technology Conference 2016
curtin.departmentWASM: Minerals, Energy and Chemical Engineering (WASM-MECE)
curtin.accessStatusFulltext not available


Files in this item

FilesSizeFormatView

There are no files associated with this item.

This item appears in the following Collection(s)

Show simple item record