Show simple item record

dc.contributor.authorAbnisa, F.
dc.contributor.authorWan Daud, W.M.A.
dc.contributor.authorArami-Niya, Arash
dc.contributor.authorAli, B.S.
dc.contributor.authorSahu, J.N.
dc.date.accessioned2020-04-01T15:00:01Z
dc.date.available2020-04-01T15:00:01Z
dc.date.issued2014
dc.identifier.citationAbnisa, F. and Wan Daud, W.M.A. and Arami-Niya, A. and Ali, B.S. and Sahu, J.N. 2014. Recovery of liquid fuel from the aqueous phase of pyrolysis oil using catalytic conversion. Energy and Fuels. 28 (5): pp. 3074-3085.
dc.identifier.urihttp://hdl.handle.net/20.500.11937/78464
dc.identifier.doi10.1021/ef5003952
dc.description.abstract

Oil from the pyrolysis of biomass typically consists of two different layers defined as the aqueous and organic phases. The objective of this study was to determine the yield of liquid fuel that can be produced from the aqueous phase using a catalytic conversion. The process was supported by two different HZSM-5 catalysts with temperatures set at 405, 455, 505, and 555 °C. The oils obtained were then analyzed using Karl Fischer titration, FTIR spectroscopy, GC/MS, TGA, and CHNS/O analysis. The results showed that the oil yields obtained from catalytic cracking of the aqueous phase ranged from 4 to 9.16 wt % depending on the catalyst type and temperature. The optimum performance of deoxygenation activity was obtained with the HZSM-5/50 catalyst at a temperature of 555 °C. The oil produced under the optimum conditions was dominated by aromatics and phenols and had an HHV of 38.44 MJ/kg. © 2014 American Chemical Society.

dc.languageEnglish
dc.publisherAMER CHEMICAL SOC
dc.subjectScience & Technology
dc.subjectTechnology
dc.subjectEnergy & Fuels
dc.subjectEngineering, Chemical
dc.subjectEngineering
dc.subjectBIO-OIL
dc.subjectHZSM-5 ZEOLITE
dc.subjectACETIC-ACID
dc.subjectBIOMASS
dc.subjectGAS
dc.subjectHYDROGEN
dc.subjectEXTRACTION
dc.subjectAROMATICS
dc.subjectPRODUCTS
dc.subjectBIOFUELS
dc.titleRecovery of liquid fuel from the aqueous phase of pyrolysis oil using catalytic conversion
dc.typeJournal Article
dcterms.source.volume28
dcterms.source.number5
dcterms.source.startPage3074
dcterms.source.endPage3085
dcterms.source.issn0887-0624
dcterms.source.titleEnergy and Fuels
dc.date.updated2020-04-01T15:00:00Z
curtin.departmentWASM: Minerals, Energy and Chemical Engineering
curtin.accessStatusFulltext not available
curtin.facultyFaculty of Science and Engineering
curtin.contributor.orcidArami-Niya, Arash [0000-0001-6450-0774]
dcterms.source.eissn1520-5029
curtin.contributor.scopusauthoridArami-Niya, Arash [36468096400]


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record