View Item 

Fracture characteristics of freestanding 8 wt% Y2O3-ZrO2 coatings by single edge notched beam and Vickers indentation tests

Access Status
Open access
Authors
Wan, J.
Zhou, M.
Yang, X.
Dai, C.
Zhang, Y.
Mao, W.
Lu, Chunsheng
Date
2013
Type
Journal Article

Metadata
Show full item record
Citation
Wan, J. and Zhou, M. and Yang, X. S. and Dai, C.Y. and Zhang, Y. and Mao, W. G. and Lu, C. 2013. Fracture characteristics of freestanding 8 wt% Y2O3-ZrO2 coatings by single edge notched beam and Vickers indentation tests. Materials Science and Engineering: A. 581: pp. 140-144.
Source Title
Materials Science and Engineering A
DOI
ISSN
Remarks

NOTICE: this is the author’s version of a work that was accepted for publication in Materials Science and Engineering: A. Changes resulting from the publishing process, such as peer review, editing, corrections, structural formatting, and other quality control mechanisms may not be reflected in this document. Changes may have been made to this work since it was submitted for publication. A definitive version was subsequently published in Materials Science and Engineering: A, Volume 581, October 2013, Pages 140–144. http://dx.doi.org/10.1016/j.msea.2013.05.086

URI
Collection
Abstract

The freestanding 8 wt% Y2O3–ZrO2 (8YSZ) samples prepared by an air plasma sprayed technique were measured by single edge notched bending tests. The strain evolution and cracking near a pre-existed notch region were in-situ monitored by digital image correlation. With the help of digital image data, the critical bending loads of these notched freestanding 8YSZ samples can be accurately determined. The fracture toughness and micro-hardness of freestanding 8YSZ samples were tested by Vickers indentations. The normalized fracture toughness calculated according to the Weibull statistics is in agreement with the testing and available data. These results are instructive in predicting the lifetime and durability of thermal barrier coatings with irregular geometric structures.