Show simple item record

dc.contributor.authorDong, Jonathan
dc.contributor.authorDavies, Ian
dc.date.accessioned2021-11-17T12:45:58Z
dc.date.available2021-11-17T12:45:58Z
dc.date.issued2018
dc.identifier.citationDong, C. and Davies, I.J. 2018. Effect of stacking sequence on the flexural properties of carbon and glass fibre-reinforced hybrid composites. Advanced Composites and Hybrid Materials. 1 (3): pp. 530-540.
dc.identifier.urihttp://hdl.handle.net/20.500.11937/86455
dc.identifier.doi10.1007/s42114-018-0034-5
dc.description.abstract

A study on the flexural properties of carbon and glass fibre-reinforced epoxy hybrid composites is presented in this paper. For the purpose of understanding the effect of stacking sequence on the flexural properties, test specimens of both glass/carbon and sandwich stacking sequences were studied both experimentally and by simulation. The experimental flexural properties were obtained by three-point bend test in accordance with ASTM D7264/D7264M-15. Simulation was achieved with the aid of finite element analysis (FEA) and classical lamination theory (CLT). From the experimental and simulation results, it is concluded that for the hybrid composites with glass/carbon stacking sequences, when glass/epoxy laminas are placed on the compressive face, positive hybrid effects are present. When glass/epoxy laminas are placed on the tensile face, the hybrid effect is dominantly negative. For the sandwich-type hybrid composites, carbon/epoxy laminas should be the skin and glass/epoxy laminas should be the core. [Figure not available: see fulltext.]

dc.languageEnglish
dc.publisherSPRINGERNATURE
dc.subjectScience & Technology
dc.subjectTechnology
dc.subjectNanoscience & Nanotechnology
dc.subjectMaterials Science, Composites
dc.subjectScience & Technology - Other Topics
dc.subjectMaterials Science
dc.subjectComposites
dc.subjectHybrid
dc.subjectFlexural
dc.subjectCarbon
dc.subjectGlass
dc.titleEffect of stacking sequence on the flexural properties of carbon and glass fibre-reinforced hybrid composites
dc.typeJournal Article
dcterms.source.volume1
dcterms.source.number3
dcterms.source.startPage530
dcterms.source.endPage540
dcterms.source.issn2522-0128
dcterms.source.titleAdvanced Composites and Hybrid Materials
dc.date.updated2021-11-17T12:45:58Z
curtin.note

This is a post-peer-review, pre-copyedit version of an article published in Advanced Composites and Hybrid Materials. The final authenticated version is available online at: https://doi.org/10.1007/s42114-018-0034-5.

curtin.departmentSchool of Civil and Mechanical Engineering
curtin.accessStatusOpen access
curtin.facultyFaculty of Science and Engineering
curtin.contributor.orcidDavies, Ian [0000-0001-7076-9948]
curtin.contributor.orcidDong, Jonathan [0000-0002-5178-7881]
curtin.contributor.researcheridDavies, Ian [B-7459-2013]
curtin.contributor.researcheridDong, Jonathan [A-9806-2012]
dcterms.source.eissn2522-0136
curtin.contributor.scopusauthoridDavies, Ian [7202939649]
curtin.contributor.scopusauthoridDong, Jonathan [7401917481]


Files in this item

Thumbnail
Thumbnail

This item appears in the following Collection(s)

Show simple item record