Show simple item record

dc.contributor.authorJeong, K.
dc.contributor.authorArami-Niya, Arash
dc.contributor.authorYang, X.
dc.contributor.authorXiao, G.
dc.contributor.authorLipinski, G.
dc.contributor.authorAman, Z.M.
dc.contributor.authorMay, E.F.
dc.contributor.authorRichter, M.
dc.contributor.authorStanwix, P.L.
dc.date.accessioned2024-02-06T14:55:47Z
dc.date.available2024-02-06T14:55:47Z
dc.date.issued2023
dc.identifier.citationJeong, K. and Arami-Niya, A. and Yang, X. and Xiao, G. and Lipinski, G. and Aman, Z.M. and May, E.F. et al. 2023. Direct characterization of gas adsorption and phase transition of a metal organic framework using in-situ Raman spectroscopy. Chemical Engineering Journal. 473.
dc.identifier.urihttp://hdl.handle.net/20.500.11937/94322
dc.identifier.doi10.1016/j.cej.2023.145240
dc.description.abstract

Adsorbents are widely used in gas separation and storage processes. Performance improvements are largely achieved through the continual development of new materials with unique sorption properties. Adsorption characterization techniques, therefore, play a central role in material research and development. Here, in-situ Raman spectroscopy is presented as a multi-purpose laboratory tool for analyzing adsorption performance. In contrast to conventional laboratory techniques requiring macroscopic samples, adsorption analysis via Raman spectroscopy can be performed on samples of less than 1 mg. Furthermore, simultaneous Raman multi-phase measurements of the adsorbent structure as well as the free and bound adsorbate, are shown to provide molecular insights into the operation of functional adsorbents at conditions representative of industrial applications, which are often not attainable in conventional crystallography. Firstly, a Raman-based method is demonstrated for directly quantifying absolute adsorption capacity within individual particles. The technique is validated for Raman measurements of carbon dioxide on silica gel and compared to gravimetric and volumetric analyses. Secondly, Raman spectroscopy is applied to study a novel functional material, ZIF-7, and directly probe its pressure-regulated gate-opening mechanism, which was only observed through indirect means. These Raman measurements confirm that the sharp increase in capacity corresponds to a structural transition in the material and reveal that multiple adsorption sites contribute to the overall capacity. The Raman methods presented here can be applied to a wide range of adsorbent-adsorbate systems and present a basis for further studies into the kinetics of sorption processes.

dc.titleDirect characterization of gas adsorption and phase transition of a metal organic framework using in-situ Raman spectroscopy
dc.typeJournal Article
dcterms.source.volume473
dcterms.source.issn1385-8947
dcterms.source.titleChemical Engineering Journal
dc.date.updated2024-02-06T14:55:46Z
curtin.departmentWASM: Minerals, Energy and Chemical Engineering
curtin.accessStatusIn process
curtin.facultyFaculty of Science and Engineering
curtin.contributor.orcidArami-Niya, Arash [0000-0001-6450-0774]
curtin.contributor.researcheridArami-Niya, Arash [U-4895-2017]
curtin.contributor.scopusauthoridArami-Niya, Arash [36468096400]
curtin.repositoryagreementV3


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record