Show simple item record

dc.contributor.authorIglauer, Stefan
dc.contributor.authorMathew, M.
dc.contributor.authorBresme, F.
dc.date.accessioned2017-01-30T12:08:13Z
dc.date.available2017-01-30T12:08:13Z
dc.date.created2013-01-07T20:00:28Z
dc.date.issued2012
dc.identifier.citationIglauer, Stefan and Mathew, Manu and Bresme, Fernando. 2012. Molecular dynamics computations of brine-CO2 interfacial tensions and brine-CO2-quartz contact angles and their effects on structural and residual trapping mechanisms in carbon geo-sequestration. Journal of Colloid and Interface Science. 386 (1): pp. 405-414.
dc.identifier.urihttp://hdl.handle.net/20.500.11937/18500
dc.identifier.doi10.1016/j.jcis.2012.06.052
dc.description.abstract

In the context of carbon geo-sequestration projects, brine–CO2 interfacial tension γ and brine–CO2–rock surface water contact angles θ directly impact structural and residual trapping capacities. While γ is fairly well understood there is still large uncertainty associated with θ. We present here an investigation of γ and θ using a molecular approach based on molecular dynamics computer simulations. We consider a system consisting of CO2/water/NaCl and an α-quartz surface, covering a brine salinity range between 0 and 4 molal. The simulation models accurately reproduce the dependence of γ on pressure below the CO2 saturation pressure at 300 K, and over predict γ by ~20% at higher pressures. In addition, in agreement with experimental observations, the simulations predict that γ increases slightly with temperature or salinity. We also demonstrate that for non-hydroxylated quartz surfaces, θ strongly increases with pressure at subcritical and supercritical conditions. An increase in temperature significantly reduces the contact angle, especially at low-intermediate pressures (1–10 MPa), this effect is mitigated at higher pressures, 20 MPa. We also found that θ only weakly depends on salinity for the systems investigated in this work.

dc.publisherAcademic Press
dc.titleMolecular dynamics computations of brine-CO2 interfacial tensions and brine-CO2-quartz contact angles and their effects on structural and residual trapping mechanisms in carbon geo-sequestration
dc.typeJournal Article
dcterms.source.volume386
dcterms.source.number1
dcterms.source.startPage405
dcterms.source.endPage414
dcterms.source.issn0021-9797
dcterms.source.titleJournal of Colloid and Interface Science
curtin.note

NOTICE: this is the author’s version of a work that was accepted for publication in Journal of Colloid and Interface Science. Changes resulting from the publishing process, such as peer review, editing, corrections, structural formatting, and other quality control mechanisms may not be reflected in this document. Changes may have been made to this work since it was submitted for publication. A definitive version was subsequently published in Journal of Colloid and Interface Science, Vol. 386, No.1 (2012). DOI: 10.1016/j.jcis.2012.06.052

curtin.department
curtin.accessStatusOpen access


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record