A Numerical Investigation on Cold-Formed Steel Bulit-up Back-to-Back Channel Stub Columns
| dc.contributor.author | Ting, T. | |
| dc.contributor.author | Lau, Hieng Ho | |
| dc.contributor.editor | LAU HIENG HO | |
| dc.date.accessioned | 2017-01-30T12:09:32Z | |
| dc.date.available | 2017-01-30T12:09:32Z | |
| dc.date.created | 2012-03-23T01:19:44Z | |
| dc.date.issued | 2011 | |
| dc.identifier.citation | Ting, T.C.H. and Lau, H.H. 2011. A Numerical Investigation on Cold-Formed Steel Built-up Back-to-Back Channel Stub Columns, in Lau Hieng Ho (ed), Advances in Steel and Aluminium Structures, pp. 443-449. Singapore: Research Publishing. | |
| dc.identifier.uri | http://hdl.handle.net/20.500.11937/18719 | |
| dc.identifier.doi | 10.3850/978-981-08-9247-0_rp063-icsas11 | |
| dc.description.abstract |
This paper aims to investigate the compressive capacity and buckling behavior of cold-formed steel built-up back-to-back channels stub columns using the finite element method. Commercial finite element software, LUSAS version 14, is used in this study. LUSAS was chosen because it offers the geometric nonlinear and material nonlinear capabilities. The model was verified against experimental data and yielded good predictions on the behavior and ultimate capacity of the test specimens. The current North American design guidelines for cold-formed steel were assessed using the available experimental and numerical data. It is demonstrated that the effective width method better predicts the behavior of cold-formed steel stub column than the direct strength method. | |
| dc.publisher | RESEARCH PUBLISHING | |
| dc.subject | Cold-formed Steel | |
| dc.subject | Back-to-back Channels | |
| dc.subject | Stub column | |
| dc.subject | Finite Elements Method | |
| dc.title | A Numerical Investigation on Cold-Formed Steel Bulit-up Back-to-Back Channel Stub Columns | |
| dc.type | Conference Paper | |
| dcterms.source.startPage | 443 | |
| dcterms.source.endPage | 449 | |
| dcterms.source.title | Advances in Steel and Aluminum Structures | |
| dcterms.source.series | Advances in Steel and Aluminum Structures | |
| dcterms.source.isbn | 9789810892470 | |
| dcterms.source.conference | The 7th Internation Conference on Steel and Aluminium Structures (ICSAS 2011) | |
| dcterms.source.conference-start-date | Jul 13 2011 | |
| dcterms.source.conferencelocation | Kuching, Sarawak, Malaysia | |
| dcterms.source.place | SINGAPORE | |
| curtin.note |
Paper presented at 7th International Conference on Steel and Aluminium Structures (ICSAS 2011), Jul 13 2011, Kuching, Malaysia. | |
| curtin.department | Curtin Sarawak - Faculty Office | |
| curtin.accessStatus | Fulltext not available |