Show simple item record

dc.contributor.authorShao, Zongping
dc.contributor.authorMederos, J.
dc.contributor.authorKwak, C.
dc.contributor.authorHaile, S.
dc.date.accessioned2017-01-30T12:37:04Z
dc.date.available2017-01-30T12:37:04Z
dc.date.created2016-09-12T08:36:55Z
dc.date.issued2010
dc.identifier.citationShao, Z. and Mederos, J. and Kwak, C. and Haile, S. 2010. Evaluation of Bi <inf>2</inf>V <inf>0.9</inf>Cu <inf>0.1</inf>O <inf>5.35</inf>-an Aurivillius-type conducting oxide-as a cathode material for single-chamber solid-oxide fuel cells. Journal of Fuel Cell Science and Technology. 7 (2): pp. 0210161-0210168.
dc.identifier.urihttp://hdl.handle.net/20.500.11937/23404
dc.identifier.doi10.1115/1.3182729
dc.description.abstract

The compound Bi 2V 0.9Cu 0.1O 5.35, a typical Aurivillius-type fast oxygen ion conductor, was evaluated as a possible cathode material for single-chamber solid-oxide fuel cells operated under mixed propane and oxygen. The material was found to be structurally stable under various C 3H 8 + O 2 environments over a wide temperature range and furthermore displayed low catalytic activity for propane oxidation. However, at temperatures above 650 °C, detrimental reactions between the cathode and the ceria electrolyte occurred, producing low conductivity interfacial phases. At these high temperatures the cathode additionally underwent extensive sintering and loss of porosity and, thus, stable fuel cell operation was limited to furnace temperatures of <600 °C. Even under such conditions, however, the partial oxidation occurring at the anode (a ceria nickel cermet) resulted in cell temperatures as much as 70-110°C higher than the gas-phase temperature. This explains the sharp decrease in fuel cell performance with time during operation at a furnace temperature of 586 °C. Under optimized conditions, a peak power density of ~60 mW/cm2 was obtained, which does not compete with recent values obtained from higher activity cathodes. Thus, the poor electrochemical activity of Bi 2V 0.9Cu 0.1O 5.35, combined with its chemical instability at higher temperatures, discourages further consideration of this material as a cathode in single-chamber fuel cells. Copyright © 2010 by ASME.

dc.titleEvaluation of Bi &lt;inf&gt;2&lt;/inf&gt;V &lt;inf&gt;0.9&lt;/inf&gt;Cu &lt;inf&gt;0.1&lt;/inf&gt;O &lt;inf&gt;5.35&lt;/inf&gt;-an Aurivillius-type conducting oxide-as a cathode material for single-chamber solid-oxide fuel cells
dc.typeJournal Article
dcterms.source.volume7
dcterms.source.number2
dcterms.source.startPage0210161
dcterms.source.endPage0210168
dcterms.source.issn1550-624X
dcterms.source.titleJournal of Fuel Cell Science and Technology
curtin.departmentDepartment of Chemical Engineering
curtin.accessStatusFulltext not available


Files in this item

FilesSizeFormatView

There are no files associated with this item.

This item appears in the following Collection(s)

Show simple item record