The analysis of the power loss in a zero-voltage switching two-inductor boost cell operating under different circuit parameters
| dc.contributor.author | Li, Q. | |
| dc.contributor.author | Wolfs, Peter | |
| dc.contributor.editor | Jason Lai | |
| dc.date.accessioned | 2017-01-30T12:38:04Z | |
| dc.date.available | 2017-01-30T12:38:04Z | |
| dc.date.created | 2010-04-19T20:03:08Z | |
| dc.date.issued | 2005 | |
| dc.identifier.citation | Li, Q. and Wolfs, Peter. 2005. The analysis of the power loss in a zero-voltage switching two-inductor boost cell operating under different circuit parameters, in Lai, J. (ed), Applied Power Electronics Conference and Exposition, APEC, Mar 6 2005, pp. 1851-1857. Austin, Texas: IEEE. | |
| dc.identifier.uri | http://hdl.handle.net/20.500.11937/23582 | |
| dc.description.abstract |
This paper studies a comprehensive set of power loss components in a current fed zero-voltage switching (ZVS) two-inductor boost cell and presents a power loss optimisation method. The ZVS two-inductor boost cell is fed from a sinusoidally modulated two-phase synchronous buck converter with an interphase transformer (IPT). The ZVS boost cell produces a rectified sinusoidal voltage, which can be applied to an unfolding stage to generate grid compatible voltage as part of a module integrated photovoltaic inverter. This paper conducts the numerical analysis of the average power loss and establishes a set of circuit parameters for an optimized operating point, which results in the minimal power loss in the ZVS boost cell. The experimental results for a 1 MHz 100 W ZVS two-inductor boost converter is presented | |
| dc.publisher | IEEE | |
| dc.subject | inductors | |
| dc.subject | losses | |
| dc.subject | invertors | |
| dc.subject | zero voltage switching | |
| dc.subject | switching convertors | |
| dc.subject | optimisation | |
| dc.title | The analysis of the power loss in a zero-voltage switching two-inductor boost cell operating under different circuit parameters | |
| dc.type | Conference Paper | |
| dcterms.source.startPage | 1851 | |
| dcterms.source.endPage | 1857 | |
| dcterms.source.title | Applied Power Electronics Conference and Exposition, 2005. APEC 2005. Twentieth Annual IEEE | |
| dcterms.source.series | Applied Power Electronics Conference and Exposition, 2005. APEC 2005. Twentieth Annual IEEE | |
| dcterms.source.isbn | 0-7803-8975-1 | |
| dcterms.source.conference | Applied Power Electronics Conference and Exposition, APEC | |
| dcterms.source.conference-start-date | Mar 6 2005 | |
| dcterms.source.conferencelocation | Austin, Texas | |
| dcterms.source.place | USA | |
| curtin.note |
Copyright © 2005 IEEE This material is presented to ensure timely dissemination of scholarly and technical work. Copyright and all rights therein are retained by authors or by other copyright holders. All persons copying this information are expected to adhere to the terms and constraints invoked by each author's copyright. In most cases, these works may not be reposted without the explicit permission of the copyright holder. | |
| curtin.accessStatus | Open access | |
| curtin.faculty | Department of Electrical and Computer Engineering | |
| curtin.faculty | School of Engineering | |
| curtin.faculty | Faculty of Science and Engineering |