Show simple item record

dc.contributor.authorNami, A.
dc.contributor.authorzare, F.
dc.contributor.authorGhosh, Arindam
dc.identifier.citationNami, A. and zare, F. and Ghosh, A. 2009. EMI issues in high power and high level diode-clamped converters, in - (ed), 2009 Electromagnetic Compatibility Symposium Adelaide, Sep 17 2009, pp. 65-70. Adelaide, South Australia: Institute of Electrical and Electronics Engineers ( IEEE ).

Planar busbar is a good candidate to reduce interconnection inductance in high power inverters compared with cables. However, power switching components with fast switching combined with hard switched-converters produce high di/dt during turn off time and busbar stray inductance then becomes an important issue which creates overvoltage. It is necessary to keep the busbar stray inductance as low as possible to decrease overvoltage and Electromagnetic Interference (EMI) noise. In this paper, the effect of different transient current loops on busbar physical structure of the high-voltage high-level diode-clamped converters will be highlighted. Design considerations of proper planar busbar will also be presented to optimise the overall design of diode-clamped converters.

dc.publisherInstitute of Electrical and Electronics Engineers ( IEEE )
dc.titleEMI issues in high power and high level diode-clamped converters
dc.typeConference Paper
dcterms.source.title2009 Electromagnetic Compatibility Symposium Adelaide
dcterms.source.series2009 Electromagnetic Compatibility Symposium Adelaide
dcterms.source.conference2009 Electromagnetic Compatibility Symposium Adelaide
dcterms.source.conference-start-dateSep 17 2009
dcterms.source.conferencelocationAdelaide, South Australia
curtin.accessStatusFulltext not available

Files in this item


This item appears in the following Collection(s)

Show simple item record