Reactive power control of DFIG wind power system connected to IEEE 14 bus distribution network
dc.contributor.author | Moghbel, Moayed | |
dc.contributor.author | Mokui, Hasmina Tari | |
dc.contributor.author | Masoum, Mohammad Sherkat | |
dc.contributor.author | Mohseni, Mansour | |
dc.contributor.editor | Mochamad Ashari | |
dc.date.accessioned | 2017-01-30T13:58:09Z | |
dc.date.available | 2017-01-30T13:58:09Z | |
dc.date.created | 2015-03-03T20:17:25Z | |
dc.date.issued | 2012 | |
dc.identifier.citation | Moghbel, M. and Mokui, H.T. and Masoum, M.S. and Mohseni, M. 2012. Reactive power control of DFIG wind power system connected to IEEE 14 bus distribution network, in 22nd Australasian Universities Power Engineering Conference 2012 (AUPEC), Sep 26-29 2012. Bali, Indonesia: IEEE. | |
dc.identifier.uri | http://hdl.handle.net/20.500.11937/36856 | |
dc.description.abstract |
With the increasing penetration of distributed wind turbines (WTs) in distribution systems, utilities are requiring these renewable resources to provide reactive power supports during steady-state and transient operating conditions. WTs with doubly fed induction generators (DFIGs) are able to independently control active and reactive power. The reactive power capability is subjected to several limitations resulting from the voltage, current, and speed, which changes with the operating point. This paper examines the reactive power control capability of DFIG-based WT by connecting it to the IEEE 14 bus distribution system. The stator-flux-oriented vector control principle is applied to build a model of the DFIG in dq synchronous coordination system, and the PSCAD/EMTDC simulation software is employed to investigate its performance in providing reactive power support to the grid. | |
dc.publisher | Institut Teknologi Sepuluh Nopember (ITS) | |
dc.relation.uri | http://ieeexplore.ieee.org/xpl/articleDetails.jsp?arnumber=6360204 | |
dc.title | Reactive power control of DFIG wind power system connected to IEEE 14 bus distribution network | |
dc.type | Conference Paper | |
dcterms.source.title | Proceedings of the 22nd Australasian Universities Power Engineering Conference | |
dcterms.source.series | Proceedings of the 22nd Australasian Universities Power Engineering Conference | |
dcterms.source.isbn | 9781921897078 | |
dcterms.source.conference | 22nd Australasian Universities Power Engineering Conference | |
dcterms.source.conference-start-date | Sep 26 2012 | |
dcterms.source.conferencelocation | Bali, Indonesia | |
dcterms.source.place | Bali, Indonesia | |
curtin.note |
Copyright © 2012 IEEE. Personal use of this material is permitted. Permission from IEEEmust be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works. | |
curtin.department | Department of Electrical and Computer Engineering | |
curtin.accessStatus | Open access |