Performance of PrBaCo2O5+d as a proton-conducting solid-oxide fuel cell cathode
|dc.identifier.citation||Lin, Y. and Ran, R. and Zhang, C. and Cai, R. and Shao, Z. 2010. Performance of PrBaCo2O5+d as a proton-conducting solid-oxide fuel cell cathode. Journal of Physical Chemistry A. 114 (11): pp. 3764-3772.|
The potential application of PrBaCo2O5-d (PBC) double perovskite oxide as a cathode for a proton-conducting solid-oxide fuel cell based on a BaZr0.1Ce0.7Y0.2O 3-d(BZCY) electrolyte was systematically investigated. XRD and O2-TPD results demonstrated that cation exchange between BZCY and PBC perovskites simultaneously occurs from the formation of Co3+-doped BZCY and Y3+-doped PBC. This event does not significantly change the cathodic polarization resistance. Under real fuel cell conditions, neither the electrolyte nor electrode resistances were significantly affected by the phase reaction and morphologic change of PBC. Anode-supported cells with an electrolyte thickness of ~30 µm were successfully fabricated via a dual dry pressing process. Relatively high performance of 520 and 407 mW cm -2 at 700 °C was achieved for the cell with a PBC cathode fired at 950 and 1100 °C, respectively. A low electrode polarization resistance of 0.06 cm2 was achieved at 700 °C for the PBC cathode calcined at 950 °C. © 2010 American Chemical Society.
|dc.publisher||American Chemical Society|
|dc.title||Performance of PrBaCo2O5+d as a proton-conducting solid-oxide fuel cell cathode|
|dcterms.source.title||Journal of Physical Chemistry A|
|curtin.department||Department of Chemical Engineering|
|curtin.accessStatus||Fulltext not available|
Files in this item
There are no files associated with this item.