Show simple item record

dc.contributor.authorNi, P.
dc.contributor.authorXia, Y.
dc.contributor.authorLi, Jun
dc.contributor.authorHao, Hong
dc.date.accessioned2017-10-30T08:16:21Z
dc.date.available2017-10-30T08:16:21Z
dc.date.created2017-10-30T08:03:07Z
dc.date.issued2017
dc.identifier.citationNi, P. and Xia, Y. and Li, J. and Hao, H. 2017. Improved decentralized structural identification with output-only measurements. Measurement.
dc.identifier.urihttp://hdl.handle.net/20.500.11937/57274
dc.identifier.doi10.1016/j.measurement.2017.09.029
dc.description.abstract

© 2017 Elsevier Ltd. This paper proposes an improved decentralized structural identification approach with output-only measurements. The improved approach can be used for system identification of both linear and nonlinear structures. A large-scale structure is divided into a number of smaller zones according to its finite element configuration. Each zone is dynamically tested in sequence with its own set of sensor placement. The external excitation forces in each zone are identified using the Kalman filter technique. Structural parameters of the whole structure are divided into several subsets and then updated by using the Newton-SOR method. Both the external excitations and structural parameters are iteratively updated until a defined convergence criterion is met. The proposed technique is then applied to two numerical examples: a six floor building and a planar truss structure. The nonlinear system parameters of the building are correctly identified. The unknown excitation force, damage location, and damage severity in the plane truss structure are successfully identified. The effect of measurement noise on the identified results is also studied. An eight floor shear type structure is finally tested in the laboratory. The experimental results further verify the effectiveness and efficiency of the proposed technique in damage identification using output-only measurements.

dc.publisherElsevier
dc.titleImproved decentralized structural identification with output-only measurements
dc.typeJournal Article
dcterms.source.issn0263-2241
dcterms.source.titleMeasurement
curtin.departmentDepartment of Civil Engineering
curtin.accessStatusFulltext not available


Files in this item

FilesSizeFormatView

There are no files associated with this item.

This item appears in the following Collection(s)

Show simple item record