Show simple item record

dc.contributor.authorDavidson, David
dc.contributor.authorEichler, J.
dc.contributor.authorHazdra, P.
dc.contributor.authorCapek, M.
dc.date.accessioned2018-12-13T09:08:40Z
dc.date.available2018-12-13T09:08:40Z
dc.date.created2018-12-12T02:47:12Z
dc.date.issued2014
dc.identifier.citationDavidson, D. and Eichler, J. and Hazdra, P. and Capek, M. 2014. EM programmer's notebook: Aspects of mesh generation for characteristic-mode analysis. IEEE Antennas and Propagation Magazine. 56 (3): pp. 172-183.
dc.identifier.urihttp://hdl.handle.net/20.500.11937/71057
dc.identifier.doi10.1109/MAP.2014.6867702
dc.description.abstract

This paper deals with practical aspects of mesh generation for the theory of characteristic modes. First, we describe a tool for surface-mesh generation in MATLAB. The tool is afterwards used for an analysis of relative convergence of modal results computed by an in-house modal analyzer in MATLAB. Different meshing scenarios are selected for a dipole, a rectangular patch, and a rectangular patch with a slot, and a recommendation for a mesh-refinement strategy is given. The study is supported by a simple error analysis, considering the approximation error in the evaluation of moment-matrix elements. It is shown that the results are also applicable for the commercial implementation in FEKO software. © 1990-2011 IEEE.

dc.publisherInstitute of Electrical and Electronics Engineers
dc.titleEM programmer's notebook: Aspects of mesh generation for characteristic-mode analysis
dc.typeJournal Article
dcterms.source.volume56
dcterms.source.number3
dcterms.source.startPage172
dcterms.source.endPage183
dcterms.source.issn1045-9243
dcterms.source.titleIEEE Antennas and Propagation Magazine
curtin.departmentCurtin Institute of Radio Astronomy (Engineering)
curtin.accessStatusFulltext not available


Files in this item

FilesSizeFormatView

There are no files associated with this item.

This item appears in the following Collection(s)

Show simple item record