Physio-mechanical properties of aluminium metal matrix composites reinforced with Al2O3 and SiC
dc.contributor.author | Debnath, Sujan | |
dc.contributor.author | OO, Z. | |
dc.contributor.author | Rahman, Muhammad | |
dc.contributor.author | Maleque, M. | |
dc.contributor.author | Tan, C. | |
dc.date.accessioned | 2017-01-30T13:12:15Z | |
dc.date.available | 2017-01-30T13:12:15Z | |
dc.date.created | 2013-02-25T20:00:29Z | |
dc.date.issued | 2012 | |
dc.identifier.citation | Sujan, D. and Oo, Z. and Rahman, M.E. and Maleque, M.A. and Tan, C.K. 2012. Physio-mechanical properties of aluminium metal matrix composites reinforced with Al2O3 and SiC. International Journal of Engineering and Applied Sciences. 6: pp. 288-291. | |
dc.identifier.uri | http://hdl.handle.net/20.500.11937/29342 | |
dc.description.abstract |
Particulate reinforced metal matrix composites (MMCs) are potential materials for various applications due to their advantageous of physical and mechanical properties. This paper presents a study on the performance of stir cast Al2O3 SiC reinforced metal matrix composite materials. The results indicate that the composite materials exhibit improved physical and mechanical properties, such as, low coefficient of thermal expansion, high ultimate tensile strength, high impact strength, and hardness. It has been found that with the increase of weight percentage of reinforcement particles in the aluminium metal matrix, the new material exhibits lower wear rate against abrasive wearing. Being extremely lighter than the conventional gray cast iron material, the Al-Al2O3 and Al-SiC composites could be potential green materials for applications in the automobile industry, for instance, in making car disc brake rotors. | |
dc.publisher | WORLD ACADEMY OF SCIENCE, ENGINEERING AND TECHNOLOGY (WASET) | |
dc.relation.uri | http://waset.org/publications/11049/physio-mechanical-properties-of-aluminium-metal-matrix-composites-reinforced-with-al2o3-and-sic | |
dc.subject | strength to weight ratio | |
dc.subject | wear rate | |
dc.subject | metal matrix composite | |
dc.title | Physio-mechanical properties of aluminium metal matrix composites reinforced with Al2O3 and SiC | |
dc.type | Journal Article | |
dcterms.source.volume | 6 | |
dcterms.source.startPage | 288 | |
dcterms.source.endPage | 291 | |
dcterms.source.issn | 2070-3740 | |
dcterms.source.title | International Journal of Engineering and Applied Sciences | |
curtin.note |
This article is published under the Open Access publishing model and distributed under the terms of the Creative Commons Attribution License | |
curtin.note |
Copyright © 2012 S. Debnath, Z. Oo, M. Rahman, M. Maleque, and C. Tan | |
curtin.department | ||
curtin.accessStatus | Open access |