Show simple item record

dc.contributor.authorSu, C.
dc.contributor.authorWang, W.
dc.contributor.authorChen, Y.
dc.contributor.authorYang, G.
dc.contributor.authorXu, X.
dc.contributor.authorTadé, M.
dc.contributor.authorShao, Zongping
dc.date.accessioned2017-01-30T13:18:52Z
dc.date.available2017-01-30T13:18:52Z
dc.date.created2015-10-29T04:09:37Z
dc.date.issued2015
dc.identifier.citationSu, C. and Wang, W. and Chen, Y. and Yang, G. and Xu, X. and Tadé, M. and Shao, Z. 2015. SrCo0.9Ti0.1O3−δ As a New Electrocatalyst for the Oxygen Evolution Reaction in Alkaline Electrolyte with Stable Performance. ACS Applied Materials and Interfaces. 7 (32): pp. 17663-17670.
dc.identifier.urihttp://hdl.handle.net/20.500.11937/30318
dc.identifier.doi10.1021/acsami.5b02810
dc.description.abstract

The development of efficient, inexpensive, and stable electrocatalysts for the oxygen evolution reaction (OER) is critical for many electrochemical energy conversion technologies. The prohibitive price and insufficient stability of the state-of-the-art IrO2 electrocatalyst for the OER inhibits its use in practical devices. Here, SrM0.9Ti0.1O3−δ (M = Co, Fe) perovskites with different B-site transition metal elements were investigated as potentially cheaper OER electrocatalysts. They were prepared through a typical sol–gel route, and their catalytic activities for the OER in alkaline medium were comparatively studied using rotating disk electrodes. Both materials show high initial intrinsic activities in alkaline electrolyte for the OER, comparable to the benchmark perovskite-type electrocatalyst Ba0.5Sr0.5Co0.8Fe0.2O3−δ (BSCF), but SrCo0.9Ti0.1O3−δ (SCT) possessed more operational stability than SrFe0.9Ti0.1O3−δ (SFT), even better than BSCF and IrO2 catalysts. Based on the X-ray photoelectron spectra analysis of the oxidation states of the surface Co/Fe in both SFT and SCT before and after the OER tests, an explanation for their different operational stabilities was proposed by adopting a reported activity descriptor correlated to the eg occupancy of the 3d electron of the surface transition metal cations in the perovskite oxides. The above results indicate that SCT is a promising alternative electrocatalyst for the OER and can be used in electrochemical devices for water oxidation.

dc.publisherAmerican Chemical Society
dc.titleSrCo0.9Ti0.1O3−δ As a New Electrocatalyst for the Oxygen Evolution Reaction in Alkaline Electrolyte with Stable Performance
dc.typeJournal Article
dcterms.source.volume7
dcterms.source.number32
dcterms.source.startPage17663
dcterms.source.endPage17670
dcterms.source.issn1944-8244
dcterms.source.titleACS Applied Materials and Interfaces
curtin.departmentDepartment of Chemical Engineering
curtin.accessStatusFulltext not available


Files in this item

FilesSizeFormatView

There are no files associated with this item.

This item appears in the following Collection(s)

Show simple item record