Show simple item record

dc.contributor.authorZeng, J.
dc.contributor.authorZhou, Y.
dc.contributor.authorLi, L.
dc.contributor.authorJiang, San Ping
dc.date.accessioned2017-01-30T14:43:26Z
dc.date.available2017-01-30T14:43:26Z
dc.date.created2014-10-08T06:00:43Z
dc.date.issued2011
dc.identifier.citationZeng, J. and Zhou, Y. and Li, L. and Jiang, S.P. 2011. Phosphotungstic acid functionalized silica nanocomposites with tunable bicontinuous mesoporous structure and superior proton conductivity and stability for fuel cells. Physical Chemistry Chemical Physics. 13 (21): pp. 10249-10257.
dc.identifier.urihttp://hdl.handle.net/20.500.11937/40493
dc.description.abstract

A novel proton exchange membrane using phosphotungstic acid (HPW) as proton carrier and cubic bicontinuous Ia3d mesoporous silica (meso-silica) as framework material is successfully developed as proton exchange membranes for fuel cells. Meso-silica is functionalized by 80wt% HPW using a vacuum impregnation method. The HPW-functionalized meso-silica (HPW-mesosilica) nanocomposites are characterized by transmission electron microscopy (TEM), small angle X-ray scattering (SAXS), N2 adsorption/desorption isotherms, thermogravimetric analysis (TGA), water uptake and four-probe conductivity. The results show that the mesoporous structure of silica hosts can be altered by the hydrothermal temperature. Conductivity measurements indicate that meso-silica host with pore diameter of 5.0 nm has the highest proton conductivity of 0.11 S cm1 at 80 1C and 100% relative humidity (RH) with an activation energy of B14 kJ mol1 and better stability as compared to that with large mesopores. The proton conductivity and performance of HPW-meso-silica nanocomposites also increase with the RH, but it is far less sensitive to RH changes as compared to conventional perfluorosulfonic acid (PFSA) polymers such as Nafion. The maximum power density of the cell with HPW-meso-silcia nanocomposite membranes is 221 mW cm2 at 80 1C and 100% RH and decreases to 171 mW cm2 when RH is reduced to 20%, a 20% decrease in power output. In the case of a cell with Nafion 115 membranes, the decrease in power density is 95% under identical test conditions. The results demonstrate that the HPW-meso-silica nanocomposite has an exceptionally high water retention capability and is a promising proton exchange membrane material for fuel cellsoperating at reduced humidity and elevated temperatures.

dc.publisherRoyal Society of Chemistry
dc.titlePhosphotungstic acid functionalized silica nanocomposites with tunable bicontinuous mesoporous structure and superior proton conductivity and stability for fuel cells
dc.typeJournal Article
dcterms.source.volume13
dcterms.source.number21
dcterms.source.startPage10249
dcterms.source.endPage10257
dcterms.source.issn14639076
dcterms.source.titlePhysical Chemistry Chemical Physics
curtin.departmentDepartment of Chemical Engineering
curtin.accessStatusFulltext not available


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record