Analysis of IEC 61850 for a Reliable Communication System between Substations
MetadataShow full item record
IEC 61850 Standard was introduced to address the challenge presented by existence of the multiple protocols in substation communications, which include many proprietary protocols; and to address the challenge introduced by legacy complicated substation from both cost and complicity. In this paper, the simulation results of different types of IEC 61850 network system configurations using OPNET Modeler simulation software were presented and the influence on data rate and delay characteristics of these system configurations were evaluated. The simulated results confirm that the ring configured system suitable for higher loading characteristics and higher system reliability.
Showing items related by title, author, creator and subject.
Das, Narottam; Modi, H.; Islam, Syed (2014)© 2014 ACPE. This paper investigates the communication network architectures for power systems between substations using IEC 61850. Optimized Network Engineering Tools (OPNET) is used for the simulations. The simulation ...
Das, N.; Islam, Syed (2014)Interoperability among multi-vendor substations automation devices, is now achievable due to the introduction of IEC 61850 standard, which allows power system communication between substations. This standard does not ...
High performance communication redundancy in a digital substation based on IEC 62439-3 with a station bus configurationKumar, S.; Das, N.; Islam, Syed (2015)High speed communication is critical in a digital substation from protection, control and automation perspectives. Although International Electro-Technical Commission (IEC) 61850 standard has proven to be a reliable guide ...