Show simple item record

dc.contributor.authorYang, Xin
dc.contributor.authorDas, Narottam
dc.contributor.authorIslam, Syed
dc.contributor.editorMichael Negnevitsky
dc.date.accessioned2017-01-30T10:39:32Z
dc.date.available2017-01-30T10:39:32Z
dc.date.created2014-02-13T20:00:38Z
dc.date.issued2013
dc.identifier.citationYang, Xin and Das, Narottam and Islam, Syed. 2013. Analysis of IEC 61850 for a Reliable Communication System between Substations, in Negnevitsky, M. (ed), Proceedings of the Australasian Universities Power Engineering Conference (AUPEC), Sep 29-Oct 3 2013. Hobart, Tasmania, Australia: University of Tasmania.
dc.identifier.urihttp://hdl.handle.net/20.500.11937/4491
dc.description.abstract

IEC 61850 Standard was introduced to address the challenge presented by existence of the multiple protocols in substation communications, which include many proprietary protocols; and to address the challenge introduced by legacy complicated substation from both cost and complicity. In this paper, the simulation results of different types of IEC 61850 network system configurations using OPNET Modeler simulation software were presented and the influence on data rate and delay characteristics of these system configurations were evaluated. The simulated results confirm that the ring configured system suitable for higher loading characteristics and higher system reliability.

dc.publisherUniversity of Tasmania
dc.relation.urihttp://ieeexplore.ieee.org/stamp/stamp.jsp?tp=&arnumber=6725482
dc.subjectIntelligent Electronic Device (IED)
dc.subjectIEC 61850
dc.subjectBus Topology
dc.subjectStar Topology
dc.subjectRing Topology
dc.subjectOptimized Network Engineering Tools (OPNET)
dc.titleAnalysis of IEC 61850 for a Reliable Communication System between Substations
dc.typeConference Paper
dcterms.source.titleProceedings of the 2013 Australasian Universities Power Engineering Conference
dcterms.source.seriesProceedings of the 2013 Australasian Universities Power Engineering Conference
dcterms.source.isbn9781862959132
dcterms.source.conference2013 Australasian Universities Power Engineering Conference
dcterms.source.conference-start-dateSep 29 2013
dcterms.source.conferencelocationHobart, Tasmania, Australia
dcterms.source.placeHobart, Tasmania
curtin.department
curtin.accessStatusFulltext not available


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record