Show simple item record

dc.contributor.authorNdaruhadi, P.
dc.contributor.authorSharif, S.
dc.contributor.authorNoordin, M.
dc.contributor.authorKurniawan, Denni
dc.date.accessioned2018-05-18T07:59:37Z
dc.date.available2018-05-18T07:59:37Z
dc.date.created2018-05-18T00:23:20Z
dc.date.issued2014
dc.identifier.citationNdaruhadi, P. and Sharif, S. and Noordin, M. and Kurniawan, D. 2014. Effect of cutting parameters on surface roughness in turning of bone, pp. 708-712.
dc.identifier.urihttp://hdl.handle.net/20.500.11937/67744
dc.identifier.doi10.4028/www.scientific.net/AMR.845.708
dc.description.abstract

Surface roughness indicates the damage of the bone tissue due to bone machining process. Aiming at inducing the least damage, this study evaluates the effect of some cutting conditions to the surface roughness of machined bone. In the turning operation performed, the variables are cutting speed (26 and 45 m/min), feed (0.05 and 0.09 mm/rev), tool type (coated and uncoated), and cutting direction (longitudinal and transversal). It was found that feed did not significantly influence surface roughness. Among the influencing factor, the rank is tool type, cutting speed, and cutting direction. © (2014) Trans Tech Publications, Switzerland.

dc.titleEffect of cutting parameters on surface roughness in turning of bone
dc.typeConference Paper
dcterms.source.volume845
dcterms.source.startPage708
dcterms.source.endPage712
dcterms.source.titleAdvanced Materials Research
dcterms.source.seriesAdvanced Materials Research
dcterms.source.isbn9783037859360
curtin.departmentCurtin Malaysia
curtin.accessStatusFulltext not available


Files in this item

FilesSizeFormatView

There are no files associated with this item.

This item appears in the following Collection(s)

Show simple item record